SSD 01-7IN Mini Lathe Apron Gear Cover Chip Guard Petg 7X10 7X12 7X14

( Brand: Ssd ), ( Manufacturer Part Number: 01-7IN ), ( Part Type: Cover Chip Guard ), ( Suitable For: 7x10 7x16 Mini Lathes ), ( Country/region Of Manufacture: United States )

Review SSD Mini Lathe Apron Gear Cover Chip Guard Petg 7x10 7x12 7x14 Usa

The 01-7in Mini Lathe Apron Gear Cover Chip Guard, made of high-quality Polyethylene Terephthalate (PETG), is an essential safety accessory for your mini lathe. This chip guard measures 7 inches in length and is available in three width options: 10 inches, 12 inches, and 14 inches, ensuring a perfect fit for various lathe models.

The PETG material used in this chip guard provides several advantages. It is lightweight, yet highly durable, ensuring long-lasting protection for your mini lathe. PETG is also impact-resistant, making it an ideal material for withstanding the high-speed chips and debris that are common during lathe operations.

The unique design of the 01-7in Mini Lathe Apron Gear Cover Chip Guard features a snug-fitting apron that covers the gear and the drive pulley, preventing chips and debris from entering the lathe's workings. This apron is also adjustable, allowing you to customize the fit to your specific lathe model.

The chip guard's transparent design enables you to monitor your workpiece without any obstruction, ensuring you maintain a clear view of your project. The PETG material is also resistant to UV light and heat, ensuring it does not degrade or discolor over time, even under continuous use.

In conclusion, the 01-7in Mini Lathe Apron Gear Cover Chip Guard is a must-have safety accessory for your mini lathe. Its durability, impact resistance, adjustable design, and transparent material make it an excellent choice for protecting your equipment and ensuring your safety while working on your projects.

1. Protection: This chip guard provides protection for the user by deflecting chips and debris away from the operator during machining operations.

2. Durability: Made of polyethylene terephthalate (PETG), the guard is resistant to impact and wear, ensuring a long lifespan.

3. Versatility: The guard is compatible with various mini lathe sizes, including 7x10, 7x12, and 7x14, making it a versatile investment for different lathe models.

4. Easy installation: The guard is designed to be easy to install, requiring minimal tools and effort.

5. Cost-effective: Compared to other materials like metal, PETG is a more cost-effective option for a lathe chip guard.

1. Limited color options: The guard is only available in clear or black, which may not match some lathe designs.

2. Potential for warping: If exposed to high temperatures, PETG may warp, potentially affecting the guard's fit on the lathe.

3. Limited customizability: Since the guard is a standard size, it may not fit all custom or specialized mini lathe configurations.

The 01-7in mini lathe apron gear cover chip guard petg 7x10 7x12 7x14 ssd is an excellent investment for anyone looking to protect themselves and their lathe while working. Its durability, versatility, and cost-effectiveness make it an attractive option. However, potential limitations in color options, customizability, and temperature resistance should be considered before making a purchase.

If you are in the market for a chip guard for your mini lathe, the 01-7in mini lathe apron gear cover chip guard petg 7x10 7x12 7x14 ssd is a good choice. Its balance of features and affordability make it a wise investment for any lathe owner. But, ensure that the guard's color options and potential warping limitations align with your specific needs before making a purchase.

Details:

Enjoy keeping your grease where it belongs and no more binding, jumping, or dead stopping - ruining finish worse. Pack gear assembly with favorite flavor of grease place cover back on, and screw down.

Tired of chips and dwarf getting stuck in your apron gear, binding up travel. Just greased cleaned down there, already its jam packed with debris. Try my new clear petg gear cover today. 7 heat deflection temperature psi f d648 157 maximum continuous service in air - water absorption immersion 24 hours d570 0.

20 coefficient of linear thermal expansion in fx10-5 d696 Remove the lead screw clamp on rear side of apron see pic main gear, clean everything, and replace gear place cover, trace holes drill tap favorite thread be sure your machine screws are low profile head everything again. 8 chemical resistance petg offers superior chemical when compared with many other transparent plastics.

Precision CBC laser cut from: FDA compliant petg cast sheet why petg. Units ATM test tensile strength psi d638 7,700 flexible modulus d790 310,000 Izod impact notched ft-lbs in of notch d256 1.

part #: 017in prices

• $739.00-$1299.00

specifications lathesacc:

• brand: Ssd
• mpn: 01-7in
• part type: Cover Chip Guard
• suitable for: 7x10 7x16 Mini Lathes
• country/region of manufacture: United States

Shipping lathesacc:

• type: Flat
• cost: $0.0
• handling: 1 days

Payments lathesacc:

• PayPal

General lathesacc:

• in stock: Yes
• condition: New

Seller lathesacc:

• city: Buena Park, California
• zipcode: 90620

Offer lathesacc:

• bids: 0
• Started: September 26, 2017, 10:30 pm
• best offer: false
• Sold: 0
• quantity: 19

Returns lathesacc:

• time: 30 Days
• paid by: Buyer
• policy: returns accepted
• type: Money back or exchange buyers choice

Ratings:

1. Item just as described, fast shipment, recommended!!!A 09-25-17
2. Great service, quick delivery.: 09-20-17
3. passgenau, gerne wieder 09-24-17
4. As described and will proberly do buisness again. 09-25-17
5. As advertised 09-25-17